...
| Hinweis |
|---|
The firmware update must be carried out on both devices, otherwise only one of the two devices will support the administrative distance feature, which would lead to a conflict. |
5) When using the table "Access stations" the IP address of the other cluster member has to be stored as well:
When using the table "Access stations" in the menu Management → Admin → Access settings → Configuration access ways the IP address (e.g. IP address 192.168.1.1 Netmask 255.255.255.255) or the whole network of the other WLAN Controller (e.g. IP address 192.168.1.0 Netmask 255.255.255.0) has to be entered in the table in order for the devices to be able to communicate with each other!
