Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Page properties




Description:
This document describes the configuration steps required to set up a VPN connection between an iPad/iPhone/iPod and a LANCOM router using the LANCOM myVPN application.

Requirements:
  • LCOS as of version 8.62 (download latest version)
  • LANtools as of version 8.62 (download latest version)
  • Apple iPad/iPhone/iPod with iOS 4.1 or later
  • LANCOM myVPN application, which must be installed on the iPad/iPhone/iPod. The myVPN application is available in the Apple AppStore.

Scenario:
This example is for configuring the following scenario:
  • An iPad/iPhone/iPod is connected to a public network (such as hotspot in a hotel) via WLAN.
  • If you are using an iPhone or iPad with the appropriate equipment, you can also use the medium 3G/4G to make the connection.
  • This public network and the Internet are to be used to set up an IPSec VPN-secured connection between the iPad/iPhone/iPod and a LANCOM router, which is operated in the local home or office network.
  • The VPN connection between the iPad/iPhone/iPod and the LANCOM router in the local home or office network is to be configured with the LANCOM myVPN application, which is installed on the iPad/iPhone/iPod.
Image Removed
Image Added

1) Configuration steps on the LANCOM router:
1.1) Open the Setup Wizard on the LANCOM router in LANconfig and select the option Provide remote access (RAS, VPN).
Image Removed
Image Added
1.2) Select the
option VPN connection over the Internet.
Image Removed
Exchange mode IKEv1.
Info:
The myVPN app only supports IKEv1.
Image Added
1.3) When selecting the VPN client, click on LANCOM myVPN.
Image Removed
Image Added
1.4) In the next dialog you have to set the name for the VPN connection. In the Address of this router box, enter the public IP address or the public DNS address (e.g. a DynDNS address) of the router.
Image Removed
Image Added
1.5) The following dialog displays the PIN, which you later require to configure the VPN connection with the myVPN application on the iPad/iPhone/iPod. To avoid forgetting this, you should mark the option Print PIN. If you have no printer, write the PIN down.
Information:
In case you forget the PIN for a myVPN access, then you can view this in the configuration of the LANCOM router under VPN
-> myVPN -> myVPN
→ myVPN → myVPN accounts.
Image Removed
Image Added
1.6) Click on Finish to complete the configuration of the LANCOM router. The configuration is then written back to the device.
Image Removed

Image Added

1.7) If in Step 1.5. you activated the option Print PIN now, the the Windows print dialog will open up. Click on Print to print-out the PIN.

Image Removed

Image Added


2) Configuration steps on the iPad/iPhone/iPod:
2.1) Make sure that you have a WLAN connection to the local network (hotspot, etc.) and that you have access to the Internet.
Info:
If you want to set up a myVPN connection over the internet (WAN), please make sure that there is no Port-Mapping or -Forwarding for HTTPS-Port 443 configured on your LANCOM
-
Router.
If the HTTPS
-Port
port 443 is mapped or
forwarded
forwardede, the iPhone/iPad
/iPod
is not able to obtain the myVPN
-configuration
vonfiguration profile, which is installed on the router.
2.2) Start the myVPN application on the iPad/iPhone/iPod.
2.3) Tap on the option Add remote.
Image Removed
Image Added
2.4) Enter the public IP address or the public DNS address (e.g. a DynDNS address) of the LANCOM router. In this example we use the address Test.lancom.de. Then tap on Yes.
Image Removed
Image Added
2.5) Tap on the newly created entry called Test.lancom.de.
Image Removed
Image Added
2.6) Enter the PIN, which you set in the configuration of the LANCOM router for this myVPN account (in this example the PIN is 1772).
2.7) Then tap on the Connect button.
Image Removed
Image Added
2.8) Confirm the subsequent warning with Yes.
Image Removed
Image Added
Info:
Due to the installation of a code lock for safety of the iPad/iPhone/iPod, a window appears in which you have to insert the four-digit code to unban the iPad/iPhone/iPod. 
Image Removed
Image Added
2.9) In the following dialog window, click on the Install button.
Image Removed
Image Added
2.10) Confirm the subsequent dialog with Install now.
Image Removed
Image Added
2.11) In the following dialog, tapping on Next without having entered the password means that you must enter the password for the myVPN connection every time you start the VPN connection. For security reasons we recommend that you DO NOT ENTER YOUR PASSWORD at this point. The password for the myVPN connection is the PIN, which was specified for this myVPN account during the configuration of the LANCOM router (see step 1.
12.
5 of the router configuration). In this example, the PIN is
1772
9295.
Information:
If you enter the password (PIN) at this stage, then every time an attempt is made to start a VPN connection the input dialog for this password will not be displayed and the VPN connection is established immediately.An unauthorized user can then set up the VPN connection without knowing the account data!
Image Removed
Image Added
2.12) Select Done to complete the installation of the VPN connection profile. This completes the configuration of the iPad/iPhone/iPod.
Image Removed
Image Added

3) Starting the myVPN connection on the iPad/iPhone/iPod.
3.1) Open the Settings dialog and navigate to the menu General
-> Network -> VPN
→ Network → VPN.
3.2) Start the VPN connection by tapping on the switch.
Image Removed
Image Added
3.3) In the following dialog you can enter the PIN for the myVPN connection. The password for the myVPN connection is the PIN, which was specified for this myVPN account during the configuration of the LANCOM router (see step 1.
12. of
5 of the router configuration). In this example, the PIN is
1772
9295.
Image Removed
Image Added
3.4) After connecting successfully, the VPN connection is available for use.
Image Removed
Image Added

Removing a VPN profile from the iPad/iPhone/iPod:
If you created a VPN profile on your iPad/iPhone/iPod and now you want to delete it again, proceed as follows:
1) Start the LANCOM myVPN app on the iPad/iPhone/iPod and tap on the red delete icon.
Image Removed
Image Added
2) An additional red delete icon appears next to the VPN profile. Tap on this icon to select the profile for deletion.
Image Removed
Image Added
3) Tap on the button Delete to remove the profile from the myVPN application.
Image Removed
Image Added
4) Open the Settings dialog on your iPad/iPhone/iPod and tap on the option Profiles.
Image Removed
Image Added
5) Select the VPN profile that you want to delete.
Image Removed
Image Added
6) Tap on the Remove button.
Image Removed
Image Added
7) Tapping on Remove again irreversibly deletes the VPN profile from your iPad/iPhone/iPod.
Image Removed
Image Added