...
- Invalid: The error parameter under Info must be adjusted or deleted.
- Changed: Settings were changed on the synchronization nodes (such as the IP address). On the device with the current configuration (master), execute the command do/Status/Config/Sync/New-Cluster launch /Launch or use the context menu in LANconfig to select the option Activate Configuration Synchronization Settings to restart the Config Sync.
- Not-running: Config Sync has never been started. On the device with the current configuration (master), execute the command do/Status/Config/Sync/New-Cluster/Launch or use the context menu in LANconfig to select the option Activate Configuration Synchronization Settings to start the Config Sync.
...