...
1.2 Deactivate the option Check status of this unit at start-up.
1.3 Click OK.
2. Deactivate checking of the device status for several devices at the same time:
2.1 Mark the devices for which you want to deactivate the check in the device list.
2.2 Right-click on the selected devices and select Properties.
2.3 Uncheck Check the status of this unit at start-up.
2.4 Click OK.
| Info |
|---|
As an alternative to editing in LANconfig, you can set the "Parameters" option in the "lanconf.ini" file from the default value of 1 to the value 0 for each device. Make sure that the entries after the value are retained!
|
