...
In the menu Security → Auth Method set the Authentication Method for the protcols TFTP and HTTP to none to deactivate the login. Click Apply afterwards.
Info |
---|
Möglichkeit 4: Konfigurations-Login-Sperre
Um das Erraten der Zugangsdaten durch mehrfache Login-Versuche zu erschweren, gibt es einen Brute-Force-Schutz.
Passen Sie bei Bedarf in dem Menü Security → Auth Method die Werte für den Configuration login lock an und klicken auf Apply.
This method does not deactivate the protocol itself, but only the login. For instance, when setting HTTP to none, the webinterface can still be invoked via HTTP, but the login is not possible. |
Possibility 4: Configuration login lock
To complicate guessing the login credentials via multiple login-attempts, there is a brute force protection in the switch.
Modify the values for the Configuration login lock in the menu Security → Auth Method, if necessary. Click Apply afterwards.
Info |
---|
In the factory defaults, after 5 login failures, the login is locked for 5 minutes for the used protocol |
Info |
In den Standardeinstellungen wird der Login nach 5 Fehllogins für 5 Minuten für das verwendete Protokoll gesperrt. |
Abschließender Schritt: Speichern der Start-Konfiguration:
...