...
Info |
---|
The procedures described below are based on a fully functional network scenario managed by the LMC. |
Hinweis |
---|
The Add-in script only works with dual radio access points, as the P2P connection uses the logical interface P2P-2-1, which belongs to the second WiFi module. |
Scenario:
An LMC project contains numerous LANCOM access points, two of which must now communicate via a Wi-Fi point-to-point link due to a change of premises. All of the devices are already fully integrated into the LMC.
...
6) The two new variables should then be listed in the variable list as follows:
7)
Markieren Sie die Variable P2P_PSK und klicken auf Bearbeiten.
8) Tragen Sie bei Wert einen Preshared-Key für die P2P-Verbindung ein und klicken auf Speichern. Dies ist wichtig, da ansonsten der Platzhalter im Skript verwendet wird!
9) Switch to the device dialog for the master device (here the LN-860) under Devices → LN-860 and switch to the Variables tab.
810) Click Add variables.
9) Use the checkbox to select the system variable Master.
...