Description:
This document describes the configuration steps required on a LANCOM devic=
e and on the LSM system to perform monitoring via SNMPv3.
Req=
uirements:
- LANCOM LSM as of version 1.2
Procedures:
1) Configuration steps on the LAN=
COM device:
1.1) Open the configuration for the LANCOM device (router, access point, W=
LC) in LANconfig and switch to the menu item Management -> Admin ->=
; SNMP settings.
1.2) Click the Users button.
1.3) Add a new user. While doing so, set passwords in the fields for authentication and encryption.
1.4) In SNMP settings menu, click the Groups button.
=
1.5) Set the Group name to the preconfigured entry SNMPv3ReadOnl=
y.
1.6) In User field, set the value to the user created in step 1.=
3.
1.7) Set the Security model to SNMPv3(USM).
1.8) Close the dialogs with the OK button and write the configurati=
on back to the LANCOM device.
2) Configuration steps for =
LANCOM Large Scale Monitoring:
2.1) Open the LSM and login to the system with administrator user right=
s.
2.2) In the SNMP credentials of monitored devices, create an approp=
riate SNMP rule.
Use the same settings as previously configured in the LANCOM device (see s=
tep 1.3).
2.3) To ensure that the first attempt to address a device is always perfor=
med via SNMPv3, the new rule needs to be moved to the top of the list of ru=
les.
2.4) This concludes the configuration steps in LSM. |
|