Description:
This article describes how an ADSL or VDSL connection implemented via an up=
stream DSL modem and using a VLAN ID can be set up on a Unified Firewall (P=
PPoE) and how this can be assigned to an Internet object on the desktop.&nb=
sp; Requirements:
- LANCOM R&S=C2=AE =
Unified Firewall with firmware as of version 10.2
- Internet access via upstream DSL modem
- Web browser for configuring the Unified Firewall.
The following browsers are supported:
- Google Chrome
- Chromium
- Mozilla Firefox
Procedure:
1) Setting up the network connection=
for Internet access:
1.1) Open the configuration interface of the Unified Firewall in your brows=
er, change to the menu Network =E2=86=92 Connections =E2=86=92=
Network Connections and click on the chevron icon to enter the advanced view.
1.2) Delete the entry for the interface eth0.
By default the interfaceeth0 is set toDHCP.=
strong>
1.3) Navigate to the menu Network =E2=86=92 Interfaces =E2=86=
=92 VLAN Interfaces and click on the =E2=80=9C+=E2=80=9D icon to c=
reate a new entry.
1.4) Enter the following parameters:
- Master Interface: From the drop-down menu, select the =
interface eth0.
- VLAN Tag: Enter the VLAN ID assigned =
to you by your provider.
1.5) Navigate to the menu Network =E2=86=92 Interfaces =E2=86=
=92 PPP Interfaces and click on the =E2=80=9C+=E2=80=9D icon to cr=
eate a new PPP interface.
1.6) For Master Interface, select the VLAN In=
terface created in step 1.4.
1.7) Change to the menu Network =E2=86=92 Connections =E2=86=
=92 PPP Connections and click on the =E2=80=9C+=E2=80=9D icon unde=
r PPP Connections to create a new entry.
1.8) Enter the following parameters:
- Name: Enter a descriptive name.
- Interface: Select the PPP interface c=
reated in step 1.6.
- Type: Check that the value is set to PPPoE.
- Username: Enter Username for DSL dial-in assigned to you by your provider.
- Password: Enter the password for DSL dial-in=
strong> assigned to you by your provider.
2) Create a desktop object for the I=
nternet connection:
2.1) Click the button to Create an Internet object.
2.2) Enter the following parameters:
- Object Name: Enter a descriptive name=
.
- Connections: From the drop-down menu, select the PPP Connection created in step 1.8 and click o=
n the =E2=80=9C+=E2=80=9D icon to add the object.
3) Saving and activating the configu=
ration steps:
3.1) Click on the Activate button to accept the chang=
es and enable filtering.
|