Description:
This document describes how you can enable or disable individual IKEv1 VPN=
connections in the configuration of a LANCOM router, either manually or ti=
me-controlled.
Requirements:
Procedure:
1) Open the configuration of the LANCOM router in LANconfig and navigate t=
o the menu
VPN -> IKE/IPSec -> Connection list.
<=
br>
2) Select the desired VPN connection here.
3) To
Disable the VPN connection you set
Rule cre=
ation to the value
Off.
4) Confirm your entries with
OK and write the configurati=
on back to the LANCOM router. After writing back the entries, the
V=
PN connection will disconnect.
Information:
- To enable the VPN connection again, set the
Rule creation
Manual
Automatic
Time-controlled enabling or disabling of a VPN con=
nection:
1) In LANconfig, open the configuration dialog for the LA=
NCOM router and navigate to the menu item Date & Time -> Gen=
eral -> Cron table.
2) Add a new entry.
3) Use the fields Minutes, Hours, Weekdays, Days, Months =
to enter the desired time values.
4) In order to disable a VPN connection, enter the follow=
ing syntax into the field Commands:
set /Setup/=
VPN/VPN-Peers/<Name of VPN connection> {Rule-Creation} off <=
br>
5. Now save the cron entry with the OK button.
Information:
- In order to enable the VPN connection again, you must create another cr=
on entry. Use the following syntax to enable the connection:
set /Setup/VPN/VPN-Peers/<Name of VPN connection>=
; {Rule-Creation} manually
set /Setup/VPN/VPN-Peers/<Name of VPN connection>=
; {Rule-Creation} auto