Skip to end of metadata
Go to start of metadata


Description:

Until LCOS version 7.5x, data traffic between wireless LAN clients at one or more access points could only be prohibited globally.

LCOS version 7.60 offers a finer control over data-traffic restrictions as this can be set for each logical WLAN (SSID):
  • Within an SSID
  • Within all of one access point's SSIDs
  • Globally between different access points


Requirements:


Procedure:

LANconfig:

1) Navigate to the menu Configuration -> Wireless LAN -> General -> Logical WLAN settings-> WLAN network (x).

2) Enable the option Allow data traffic between stations of this SSID.



3) Open the menu Configuration -> Wireless LAN -> Security. Here you can specify whether SSID data traffic is allowed or prohibited either locally or globally.





WEBconfig:

1) Open the configuration of the LANCOM access point in WEBconfig and go to the menu LCOS menu tree -> Setup -> Interfaces -> WLAN -> Network -> WLAN network x.

2) Under Inter-station traffic you can specify whether SSID traffic is allowed or prohibited either locally or globally.



3) Navigate to the menu Configuration -> Wireless-LAN -> Security. Here you can specify whether SSID data traffic is allowed or prohibited either locally or globally.