Anmelden
Zur Navigation springen
Zur rechten Seitenleiste springen
Zum Hauptinhalt springen
Zum Footer springen
Zum Suchen „Eingabe“ drücken
Bereiche
Hilfe
Onlinehilfe
Tastenkombinationen
Feed-Builder
Neuigkeiten
Verfügbare Gadgets
Informationen zu Confluence
Anmelden
LANCOM Support Knowledge Base
Seiten
Blog
Seitenhierarchie
Seiten durchsuchen
Konfigurieren
Bereich konfigurieren
A
n
hänge (7)
Änderungshistorie
Seiteninformation
Erledigte Kommentare
In Seitenhierarchie anzeigen
Quelle anzeigen
In Word exportieren
Seiten
Welcome to the LANCOM Support Knowledge Base
Jira-Links
Sprachen
LCMS version 9.10 or later: Configuring a DynDNS service for Strato
Angelegt von
LANCOM Redaktion
, zuletzt geändert am
Okt. 25, 2019
Description:
This document describes how to configure the dynamic DNS service of Strato when using LCMS version 9.10 or later.
Note:
Instructions for configuring the DynDNS service of Strato with
LCMS up to version 9.04
can be found in the following knowledge base document
.
Requirements:
LANtools version 9.10 or later (
download
)
Procedure:
1) Start the
Setup Wizard in LANconfig
and select the option
Configure Dynamic DNS
.
2) Select
strato.com
as the dynamic DNS provider.
3) In the next dialog, select the
Internet remote site
with an IP address that requires dynamic updating.
4) Enter the
domain name and the login data
.
5) Click on
Finish
to complete the Setup Wizard and to write the configuration to the LANCOM router.
Note:
In the configuration of the LANCOM router, the Dynamic DNS settings are stored in the menu
Communication -> General -> Action table
.
dyndns
english
tcp-/-dns-/-dhcp-/-ntp-/-snmp
netzwerkdienste-
wizard
routing-und-wan-verbindung
kb-how-to-article
strato
36453615
Überblick
Inhalte
{"serverDuration": 195, "requestCorrelationId": "3d5f47c8db0a73dc"}
Nach oben