Description: The power LED on the LANCOM router flashes. What exactly is the problem? Prerequisite:
Explanation: A power LED may flash for a number of reasons:
1) The preset
time or charge limit was reached , after which the router no longer allows any outgoing connections.
2) The router has not been assigned
a password (security feature).
3) There was an
hardware error . This is the case when the device freezes with a flashing red power LED while booting.
Solution: For 1): You can set the number of charge units and the time limit available to the router in LANconfig under Configuration -> Management -> Costs. Set these entries to 0 if you wish to switch this monitoring off, or select a relevant value. For 2): In the interest of security, specify a password for the router under Configuration -> Management -> Admin. |
|